Havis Products
Featured Products
Search by Vehicle Type/Make
Search by Computer Brand
Integrated Control System
Mounting Solutions
Recommended Packages
Mounting Bases
Consoles
Motion Devices
Trunk Mounts
Material Handling
Vehicle Interior Lighting
Computing Solutions
Power Management Solutions
Transport Solutions
Replacement Parts
Equipment Brackets
Obsolete Products


Model Abbrev. 2 Piece Part # 1 Piece Part #
620-225 (sp) C-EB25-100
620-226 (sp) C-EB25-100
PA5008 (s) C-EB25-100
PA5009 (s) C-EB25-100
If you cannot find your bracket, click here to
search the Equipment Bracket Crossover Chart.
Abbrev Explanation
(c) Control Head
(cb) Citizen's band radio
(ch) Charger
(d) Control head - amp detached
(eb) Equipment bracket
(fp) Filler Plate
(mc) Micro Com Series siren
(ms) Master Com Series siren
(mr) Mobile Radio
(p) Pack or siren
(r) Radio
(ra) Radar
(ro) Remote head only
(s) Siren
(sb) Switch Box
(sc) Self-contained
(sh) With scan head
(sm) Smart siren
(sp) Switch panel
(sr) Scanner
(ss) Series of sirens
(sx) Siren with extra switch pack
(tr) Vehicle tracking device
(wp) With one(1) HLN Switch
(N1) Side switches must be moved
(N3) Installer to drill mount holes
(N5) Midland radios have 3 different styles; Syntec I (one or two piece), Syntec II (one or two-piece), and Syntec XTR. Syntec XTR has two different size one-piece control heads, and one two-piece head. Please specify which style.
(N8) Too wide to fit inside standard console; mounts externally.
(N10) Combo bracket for 2 heads.
(N11) Motorola models using EB40-MA9 with factory supplied bail bracket- on/off by hand, 6-1/2" wide, allows space so you can reach the on/off switch. The EB35-MA9 flush mount does not allow access to the control head on/off switch.
(N12) Thin, flat clamshell-style control heads like Motorola A-3, or GE Ranger S-550 have round knobs which require access to both the top and bottom of the control face. The wire harness comes out of the top back portion of the head. Recess mounting this type of control head won't let you see it easily. Our brackets hold the control head up and out from the console approx. 1-1/2", allowing the knobs to be used, and the numbers on the control face to be visible to the driver.